LaserPro ? laser-cuttable film is a family of polyester films which has been specially coated for more efficient laser fabrication. ?It’s our special coating that makes this film so laser-cuttable. The coating allows stacks of sheets to be laser cut without the film permanently welding to itself, so multiple copies can be fabricated simultaneously. Grafix Plastics offers a wide variety of stock LaserPro laser-cuttable film products, and can also custom top-coat any type of oriented polyester base film with our proprietary coating. ?On a custom basis, we can make any polyester film to be laser-cuttable!
- Dimensional stability
- Multi-sheet cutting capability
- Tear-resistant polyester base film
- Lay flat
- Chemical resistance
- Heat resistant to 200° C
- Good clarity
- Good electrical insulating
- Custom colors available
- Stock Options
- Blue Transparent
- Translucent / Hazy
- .007″ (Blue Only)
*Not all finishes are available for each gauge and size
Need?to get something quickly? We’ve got you covered with materials in stock and ready to go.
Master Roll (by width)
- .005″, .010″ Hazy Laser, stocked >50″ Master Rolls
- .007″ Blue Stencil, stocked at 52″ wide Master Rolls
We can turn any thickness of Polyester into laser cuttable film from .001″ to .010″ thick. Minimum order quantities may apply. Contact us today for more details.
- Our laser : 9″x12″, 12″x24″, 18″x24″ and 24″x36″
- Custom sized sheets from 54″x60″ down to 1″x1″ can be produced
Custom sizes and configurations of laser-cuttable film are available with certain minimum quantities ordered.
Properties are based on?.005″/125um?general use Duralar polyester film base, because that is what LaserPro is made from. Properties of other gauges and finishes of LaserPro film can vary.
General DuraLar Spec Sheet
|Film Property||Value||Units||Test Method|
|Tensile Strength (MD)||28,000||psi||ASTM D 882|
|Tensile Strength (TD)||34,000||psi||ASTM D 882|
|Strength Elongation MD||15,000||psi||ASTM D 882|
|Strength F-5 TD||14,000||psi||ASTM D 882|
|Modulus MD||710,000||psi||ASTM D 882|
|Modulus TD||740,000||psi||ASTM D 882|
|Elongation MD||115||%||ASTM D 882|
|Elongation TD||92||%||ASTM D 882|
|Density||1.39||g/cc||ASTM D 1505|
|Viscosity||0.56||dL/g||ASTM D 4603|
|AC, 20°C, .00092"||7,000||volts/mil||ASTM D 149-64|
|25°C, 1 kHz||3.2||ASTM D150-81|
|25°C, 1 kHz||0.005||ASTM D150-65|
|Volume Resistivity 25°C||1.00E+19||ohm-cm||ASTM D257-78|
|Corona Threshold||425||V-AC||ASTM D2275-80|
|Service Temperature Range||-70-150||C|
|at 105° MD||0.6||%||Measured Shrinkage|
|at 105° TD||0.9||%||Measured Shrinkage|
|at 150° MD||1.8||%||Measured Shrinkage|
|at 150° TD||1.1||%||Measured Shrinkage|
|Thermal Expansion||1.7x10-5||ASTM D 696|
|Transmission Visible||> 88||%|
|Transmission Near IR||>80||%|
|Resistance by Class|
|Water Vapor||0.1||g/100 in2/24hr.||ASTM E-96|
|Carbon Dioxide||16||g/100 in2/24hr.||ASTM D1434-58|
|Moisture Absorption||<.8||%||ASTM D-570-63|
|Stain Resistance||Most Household Agents & Chemicals|
For more specific questions regarding DuraLar Film or LaserPro Film, please contact your sales representitive today!
Important Notice:? Grafix makes no warranties, express or implied, including but not limited to any implied warranty of merchantability of fitness for a particular purpose.? The user is responsible for determining whether the Grafix product is fit for a particular purpose and suitable for the user’s method of application.? Please remember that many factors can affect the use and performance of a Grafix Plastics?film product in a particular application.? Given the variety of factors that can affect the use and performance of a Grafix product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the Grafix product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Limitation of Remedies and Liability:? If the Grafix product is proven to be defective, THE EXCLUSIVE REMEDY, AT GRAFIX’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE GRAFIX PRODUCT. Grafix shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty or strict liability.
- DEHP, DBP and BBP free. Contact us for more details
- RoHS Compliant
Need help with your order? Click our handy start an inquiry button.